HDL buspro / HDL KNX / Touch interfaces

Master Curtain Control Motor

Product code: HDL-M/WM70M.1
Motor curtain 1CH actuator, It contains master and slave. It is the curtain controller, the master can be started by panel or other device. It supports manual mode and it has over load protection and over heat protection.
Bus interface : KNX/EIB (Master)
Rated voltage : AC220V 50Hz
Voltage range : AC220V±20% 50HZ
Working voltage : DC21-30V(Master) DC12V(Slave) from Master
Bus power Consumption : <10mA/DC30V (Master)
Slave interface : 6P network port
Rated power : 70W
Rated torque : 1.0Nm
Rated speed : 112rpm
Rail belt speed : 16cm/s
Dimensions : 284×70×50(mm)
Net weight : 1554g(master) 1543g(slave)

Copyright © 2018 All rights reserved.